DMLS

Maraging Steel MS1

Ultra High Strength Direct Metal Laser Sintering Material Maraging Steel MS1 is a pre-alloyed ultra high strength steel in fine powder form. This kind of steel is characterized by having very good mechanical properties, and being easily heat-treatable using a simple thermal age-hardening process…

View

Aluminum ALSi 10MG

Low Weight high strength direct metal laser sintering materia AlSi 10MG is a typical casting alloy with good casting properties and is typically used for cast parts with thin walls and complex geometry. It offers good strength, hardness and dynamic properties and is therefore also used for parts…

View

Cobalt Chrome MP1

Direct Metal Laser Sintering Material Parts built from CobaltChrome MP1 conform to the chemical composition UNS R31538 of high carbon CoCrMo alloy. They are nickel-free (< 0.1 % nickel content) and are characterized by a fine, uniform crystal grain structure. As built CobaltChrome MP1 meets the…

View

Cobalt Chrome SP2

Direct Metal laser Sintering Material CobaltChrome SP2 is a Co, Cr, Mo and W based alloy in fine powder form. Its composition corresponds to type 4 CoCr dental material in EN ISO 22674:2006 standard. It also fulfills the chemical and thermal requirements of EN ISO 9693 for CoCr PFM (porcelain…

View

Inconel 625

Direct Metal Laser Sintering Material Parts built from EOS NickelAlloy IN625 can be heat treated and material properties can be varied within specified range. Parts can be machined, spark-eroded, welded, micro shot-peened, polished and coated in both as-built and in heat treated conditions. This…

View

Inconel 718

Heat Resistant Direct Metal Laser Sintering Material Nickel Alloy IN718 is a nickel based heat resistant alloy in fine powder form. This kind of precipitation-hardening nickel-chromium alloy is characterized by having good tensile, fatigue, creep and rupture strength at temperatures up to 700°C.…

View

Stainless Steel 15-5

Direct Metal Laser Sintering Material Stainless Steel PH1 is a pre-alloyed stainless steel in fine powder form. The chemistry of Stainless Steel PH1 conforms to the compositions of DIN 1.4540 and UNS S15500. Standard processing parameters use full melting of the entire geometry with 20μm layer…

View

Stainless Steel 17-4

Direct Metal Laser Sintering Material Stainless Steel 17-4 is a pre-alloyed stainless steel in fine powder form. Its composition corresponds to US classification 17-4 and European 1.4542 and fulfils the requirements of AMS 5643 for Mn, Mo, Ni, Si, C, Cr and Cu. This kind of steel is characterized…

View

Titanium Ti64

Low Weight Direct Metal Laser Sintering Material Titanium Ti64 is a pre-alloyed Ti6AlV4 alloy in fine powder form. This well-known light alloy is characterized by having excellent mechanical properties and corrosion resistance combined with low specific weight and biocompatibility. This material…

View

Let's Get Started

Click the button below and generate a quote for your next project-item and one of our sales representatives will get in touch with you.

Get a Quote Here